5mm 3K karbonska plosna ploča sjajna/mat
Brief Detail
Završi
High Glossy
Mat
Polu-mat
Weave
Keper/Obična
Skovan
Unidirectionl
Debljina
Najtanji: 0,2 mm
Najdeblji: 30 mm
Prilagođeno
Veličina
Regularni: 400*500 mm
Ostala veličina: 200*300 mm
500*600 mm ili prilagođeno
Opis proizvoda :
Odabir materijala od karbonskih vlakana Toray ili Tairyfil koji dolazi iz Japana ili Tajvana.
Svaki furnir od karbonskih vlakana izrađen je od jednog sloja preprega od 100% karbonskih vlakana visoke čvrstoće sa orijentacijom vlakana 0/90.
45 stepeni je dostupan na osnovu vaših potreba.
Posebna tehnologija osigurava besprijekoran sjaj na obje strane.
Maksimalna veličina je 1000*1500 mm, debljina do 15 mm.
Ponudite uslugu CNC rezanja na osnovu vašeg crteža, potpišite NDA ugovor kako biste čuvali tajnu svog dizajna .
Napomena: Tolerancija debljine će biti malo veća
Dimenzija:
Aplikacija
5mm Carbon Fibre Sheets
-- are commonly used in various parts of drone frames, including the bottom plate, top plates, arms, and side plates. Here are some of the applications of 5mm carbon fiber sheets in these parts:
Bottom Plate: The bottom plate is the main structural component of the UAV/FPV/drone frame that provides support for the other components. 5mm carbon fiber sheets are often used as the bottom plate because they are strong enough to support the weight of the motors, battery, and other electronics while remaining lightweight. The stiffness of carbon fiber also helps to prevent flexing of the frame during flight, which can affect stability and maneuverability.
Top Plates: Top plates are used to protect the electronics and other components on the top of the drone frame. 5mm carbon fiber sheets are often used for this purpose because they provide a strong and rigid surface that can withstand impact and vibration. The stiffness of carbon fiber also helps to reduce the chances of damage to the components due to flexing or bending of the frame.
Arms: The arms of a drone frame connect the motors to the body of the drone. 5mm carbon fiber sheets are commonly used for the arms because they provide a strong and lightweight structure that can handle the stresses of flight. The stiffness of carbon fiber also helps to reduce the amount of flexing or vibration in the arms, which can improve the stability of the drone during flight.
Overall, the use of 5mm carbon fiber sheets in drone frames offers several advantages, including increased durability, improved flight performance, and reduced weight, which can lead to longer flight times and improved maneuverability. By using carbon fiber sheets in various parts of the drone frame, manufacturers can create a high-performance drone that is both strong and lightweight.